MX-M850/950/1100 Operation-Manual Maintenance-Guide GB

11
REPLACING THE STAPLE CARTRIDGE
SADDLE UNIT
1
Open the cover.
2
Pull out the unit.
Slowly pull out the unit until it
stops.
3
Remove the staple case.
(1) Grasp the green part and
pull it forward and down.
The unit that holds the
staple case will move
forward.
(2) Pull the staple case up
and out.
4
Release the staple case cover lock.
While holding both sides of the
staple case, pull up the upper
unit.
5
Remove the staple cartridge.
6
Install a new staple cartridge.
Push the staple cartridge in until
it clicks into place.
7
Push the staple case firmly back in.
8
Pull the seal that holds the staples
straight out.
Replace the cartridges in the front and back staple
cases (two cartridges).
When staples remain, the lock cannot be released.
(1)
(2)
Do not remove the seal from the cartridge before
inserting the cartridge into the case.