Operation Manual, Operation Guide, GB

1-76
BEFORE USING THE MACHINE
Contents
CLEANING THE PT CHARGER OF THE PRIMARY
TRANSFER BELT UNIT
If black or coloured lines still remain after the document glass / automatic document feeder and main charger have been
cleaned, use the PT charger cleaner to clean the PT charger.
1
Press the [POWER] key ( ) on the
operation panel to turn off the panel
power, and then switch the main power
switch to the off position.
2
Open the front cover and remove the
toner collection container.
☞ REPLACING THE TONER COLLECTION
CONTAINER (page 1-52)
3
Clean the PT charger.
(1) Slowly pull the PT charger cleaner out until
you feel a slight resistance.
(2) Slowly push the PT charger cleaner back in.
(3) Repeat the above (1) to (2) three times.
4
Install the toner collection container.
☞
REPLACING THE TONER COLLECTION
CONTAINER (page 1-52)
(1)
(2)