Software Setup Guide GB
Table Of Contents
- TABLE OF CONTENTS
- BEFORE INSTALLING THE SOFTWARE
- CD-ROMS AND SOFTWARE
- VERIFYING SYSTEM REQUIREMENTS
- CONNECTING THE MACHINE
- SETUP IN A WINDOWS ENVIRONMENT
- OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)
- INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
- INSTALLING THE PRINTER STATUS MONITOR
- INSTALLING THE SCANNER DRIVER
- INSTALLING THE PS DISPLAY FONTS
- CHANGING THE PORT
- SETUP IN A MACINTOSH ENVIRONMENT
- MAC OS X
- TROUBLESHOOTING
- WHEN INSTALLATION WAS NOT SUCCESSFUL
- REMOVING THE SOFTWARE
26
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
X When the PPD driver is installed
1
Click the [Start] button ( ), click
[Control Panel], and then click [Devices
and Printers] (or [View devices and
printers]).
• In Windows XP/Server 2003, click the [start] button
and then click [Printers and Faxes].
• In Windows 8/Server 2012, right-click in the startup
window (or swipe upward from the bottom edge), then
select [Taskbar] → [All Applications] → [Control Panel]
→ [Devices and Printers] → [Printers].
2
Open the printer properties window.
(1) Right-click the printer driver icon of the
machine.
(2) Select [Printer properties].
In Windows XP, select [Properties].
3
Configure the printer driver for the
options installed on the machine.
(1) Click the [Device Settings] tab.
(2) Configure each item based on the
machine configuration.
The items and the procedures for configuring the
items vary depending on the operating system
version.
(3) Click the [OK] button.
If [Printers and Faxes] does not appear in the [start]
menu in Windows XP, click the [start] button, click
[Control Panel], click [Printers and Other Hardware],
and then click [Printers and Faxes].
You can check the options that are installed on the
machine by printing out the "All Custom Setting List".
(However, note that "Input Tray Options" must be set
to the number of trays on the machine.)
To print out the "All Custom Setting List", see the
Operation Guide.