Operation Manual, Safety Guide, GB

40
REPLACING SUPPLIES AND MAINTENANCE
3
To clean the rollers, wipe each roller with a clean
cloth.
Caution
When cleaning the rollers, be careful not to injure your hands.
Do not touch the surface of the roller if your hands are dirty.
If the dirt is difficult to remove, moisten the cloth with a small amount of
water or neutral detergent, and then wipe with a clean, dry cloth until no
moisture remains.
4
Attach the roller cover on the bypass tray.
(1) Tilt the front of the cover slightly to attach it.
(2) Press the cover onto the bypass tray so that it locks
into place.
(1)
(2)