Operation Manual, User's Manual

7-15
SYSTEM SETTINGS►SYSTEM SETTINGS
Disable Paper Size Set
This setting is used to disable "Paper Size Set" in the
Special Modes menu. When disabled, "Paper Size Set"
cannot be used when the [SPECIAL FUNCTION] key
( ) is pressed, which prevents users other than the
administrator from easily changing the paper size
setting.
"Disable Paper Size Set" is initially disabled (factory
default setting).
Energy Save
These settings are used to configure energy saving
settings. To access one of these settings, select "Energy
Save" in the mode selection screen, and select the
desired setting in the energy save screen, and then
press the [OK] key.
Auto Power Shut-Off
(Except for Europe)
This setting is used to enable auto power shut-off mode,
which automatically turns off the power to the fusing unit
if the operation panel is not used for a certain duration of
time.
Enabling auto power shut-off mode helps conserve
energy, preserve natural resources, and reduce
environmental pollution.
The function is initially enabled.
Auto Power Shut-Off Timer
This setting is used to set the duration of time until auto
power shut-off mode activates when the operation panel
is not used. Using this function helps conserve energy,
preserve natural resources, and reduce environmental
pollution.
"1 min.", "3 min.", "5 min.", "10 min.", "15 min." (Except
for Europe), "16 min." (for Europe), "30 min.", "45 min.",
"60 min.", "75 min.", "90 min.", "105 min." or "120 min."
can be selected for the duration of time. Select a setting
that suits your work conditions.
The factory default setting is "16 min." (for Europe)/"1
min." (Except for Europe).
Preheat Mode
This setting is used to set the duration of time until
preheat mode, which automatically lowers the fusing unit
temperature, activates when the operation panel is not
used. Using this function helps conserve energy,
preserve natural resources, and reduce environmental
pollution. "1 min.", "3 min.", "5 min.", "10 min.", "15 min.",
"30 min.", "45 min.", "60 min.", "75 min.", "90 min.", "105
min." or "120 min." can be selected for the duration of
time. Select a setting that suits your work conditions.
The factory default setting is "1 min.".
Enter Auto Power Shut-Off after
the Remote Job
This function works in Auto Power Shut-Off mode. When
the machine completes a print job received from the PC
or outputs received fax data, the machine immediately
returns to the Auto Power Shut-Off mode.
Toner Save Mode (Copy)
Toner Save Mode (Print)
You can reduce the amount of toner used for
copying/printing.
Rather than disabling the auto power shut-off feature,
it is recommended that you first try lengthening the
time set in "Auto Power Shut-Off Timer" (see below).
In most cases a suitable timer setting will allow work to
proceed with minimal delay and still enable you to
enjoy the benefits of power conservation.
Toner Save Mode (Print) is only effective when the
machine's printer driver is not used. When the printer
driver is used, the printer driver setting takes
precedence.
This function may not operate in some applications
and operating systems.