Operation Manual, User's Manual

4-11
SYSTEM SETTINGS►SYSTEM SETTINGS
Device Control
These settings are used to configure settings for
hardware functions of the machine. To access one of
these settings, select "Device Control" in the mode
selection screen, select the desired setting in the device
control screen, and press the [OK] key.
Paper Weight
The temperature of toner fusing is controlled according
to the weight of the paper that is used.
Apply this setting to plain, recycled, punched,
pre-printed, letter head, colour, and user type paper.
Select from 60g/m
2
- 79g/m
2
and 80g/m
2
- 105g/m
2
.
Fusing Cleaning
Use this function to clean the machine's fusing unit when
dots or other dirt appear on the printed side of the paper.
When this function is executed, "V" printed paper is
output and the fusing unit is cleaned.
Plain Paper Settings
In this machine, paper type is divided between plain
paper 1 and plain paper 2.
When printing on plain paper with a printer driver that is
not compatible with plain paper 1 and plain paper 2, you
can set which paper type to use for printing
Status Light Setting
Set the operation of the status indicator on the machine.
Select from "Pattern 1", "Pattern 2", or "Not Use". For
explanations of the patterns, refer to "Status indicator
and error indicator (page 1-8)".
Error Light Setting
Set the operation of the error indicator when an error
occurs on the machine. Select whether the indicator
lights or blinks depending on the error status, only blinks,
or is not used.
Blink Setting for Received Data
Set whether the status indicator blinks when print data
has been received or received data is held.
• Be sure to use only paper that is in the same weight
range as the weight range set here. Do not mix in
other standard paper that differs from the set range.
• When settings are changed, the changes will take
effect after the machine is restarted. To restart the
machine, see TURNING ON THE POWER (page
1-9).
If improvement is not noticed after the first time you
use the function, try executing the function again.
Paper Weight
Plain Paper
Settings