Operation Manual, Troubleshooting

47
Fax Problems
NOTIFICATION SOUNDS ARE TOO LOUD OR
TOO SOFT, OR ARE NOT AUDIBLE (VOLUME
ADJUSTMENT)
Check Solution
Have you adjusted the volume in the
speaker settings of setting mode?
n Adjust the on-hook volume, ringing volume, line monitor volume, send/receive
completion volume, and send/receive error volume in "Settings (administrator)".
 "Settings (administrator)"
→ [System Settings] → [Common Settings] →
[Sound Settings] → [Beep Sound Settings (Image Send)]
You can adjust the volume of the
original scan complete sound in the
scan complete sound setting of
setting mode.
n A complete sound is heard when scanning of the original is completed. In
"Settings (administrator)", select [System Settings]
→ [Common Settings] →
[Sound Settings] → [Beep Sound Settings (Common)] → [Scan Complete Sound
(Image Send)] to adjust the volume.
I DON'T KNOW HOW TO STORE OR PRINT
SENDER INFORMATION
Check Solution
You can store sender information in
"Own Name and Destination Set" in
setting mode.
n To store sender information, select "Settings (administrator)]
- [System Settings]
→ [Image Send Settings] → [Common Settings]
→ [Own Name and Destination Set].
BROADCAST TRANSMISSION DOES NOT WORK
Check Solution
Has broadcast setting been disabled
in the setting mode (administrator)?
n Broadcast transmission cannot be performed when "Settings (administrator)" -
[System Settings]
→ [Image Send Settings] → [Fax Settings] → [Send Setting]
→ [Disable Fax Broadcasting] is disabled.
?
!
?
!
?
!