MX-2630 Interactive Brochure

Ease of use
Connectivity
High productivity
Finishing options
Optimised solutions
Configurations
Options
Specifications
Specifications
Section 7-11
General
Copier
Wireless LAN (optional MX-EB18 required)
Network scanner
Document filing
Network printer
Fax (optional MX-FX15 required)
External dimensions
*
1
Long-edge feeding. *
2
Only short-edge feeding can be used with A5 paper. *
3
At rated voltage, 23°C (73.4°F). May vary depending on operating conditions and environment. *
4
HDD capacity depends on procurement and sourcing status. *
5
Including adjusters and
protuberances *
6
Long-edge feeding of A4 sheets from 1st paper tray, using document glass, without Auto Colour Selection and Auto Colour mode, MFP in fully ready condition. May vary depending on operating conditions and environment. *
7
Not applicable to
Soware AP mode. *
8
Based on Sharp’s A4 standard chart, using document feeder and long-edge feeding. Using factory default settings with Auto Colour Selection o. Scan speed will vary depending on the type of document and the scan settings. *
9
Colour/greyscale
only. *
10
Storage capacity will vary depending on the type of document and the scan settings. *
11
Some features require option(s). *
12
Based on Sharp’s standard chart with approx. 700 characters (A4 long-edge feeding) at standard resolution in Super G3 mode,
33,600 bps, JBIG compression.
Design and specifications are subject to change without prior notice. All information was correct at time of print. The ENERGY STAR logo is a certification mark and may only be used to certify specific products that have been determined to meet the ENERGY
STAR programme requirements. ENERGY STAR is a US registered mark. Windows, Windows NT, Windows XP and Windows Vista are registered trademarks of Microso Corporation. Adobe and PostScript 3 are either registered trademarks or trademarks of Adobe
Systems Incorporated in the U.S. and/or other countries. All other company names, product names and logotypes are trademarks or registered trademarks of their respective owners. ©Sharp Corporation September 2017. Ref: MX-2630N Job:18375. All trademarks
acknowledged. E&OE.
Shown with options.
650 mm
1,178 mm
1,495 mm*
608 mm
* 1,648 mm when finisher tray and exit tray are extended.
Click the specification buttons for further information