MX-2300N/2700N Operation-Manual GB

69
● Setting a Maximum Number of Copies 999 97
● Initial Margin Shift Setting
98X Side-1
10 mm (1/2")
X Side-2
● Erase Width Adjustment
98X Edge
10 mm (1/2")
X Centre
● Card Shot Settings
98X Original Size X: 86 mm (3-3/8") Y: 54 mm (2-1/8")
X Fit to Page Disable
● Automatic Saddle Stitch*
6
Enable 98
● Initial Tab Copy Setting 10 mm (1/2") 98
● Disabling Deletion of Job Programs Disable 98
● Disabling of Bypass-Tray in Duplex Copy Disable 98
● Disabling of Auto Paper Selection Disable 98
● Auto Selection Setting of Tray that is Supplied the Paper Disable 99
● Initial Colour Balance Setting Factory Default State 99
● Auto Colour Calibration – 99
● B/W 600dpi x 600dpi Scanning Mode for Document Feeder Disable 100
● B/W Quick Scan from Document Glass Enable 100
■ Network Settings
101
● IP Address Setting DHCP 101
● Enable TCP/IP Enable 101
● Enable NetWare Enable 101
● Enable EtherTalk Enable 101
● Enable NetBEUI Enable 101
● Reset the NIC – 101
● Ping Command – 101
■ Printer Settings
102
● Default Settings 102
X Prohibit Notice Page Printing Enable 102
X Prohibit Test Page Printing Disable 102
X A4/Letter Size Auto Change Varies depending on country and region. 102
X Print Density Level
102 Colour 3
 B/W 3
Item Factory default setting Page