MX-2300N/2700N Operation-Manual GB

Table Of Contents
64
2
Enter the administrator password.
(1) Touch the [Password] key and enter the
administrator password.
For the procedure for entering text, see "6. ENTERING
TEXT" in the User's Guide.
(2) Touch the [OK] key.
3
Press the [SYSTEM SETTINGS] key.
This step is not necessary if you are logging in after you pressed the [SYSTEM SETTINGS] key.
4
Configure the desired system settings.
Touch the items that you wish to configure and select the
desired settings.
For detailed explanations of each of the settings, see the following pages of this chapter.
Items marked (A) above are indicated as "System Settings (Administrator)" in this manual to distinguish them from
the general user system settings.
If Auto Clear activates, logout will automatically take place.
To logout...
Press the [LOGOUT] key ( ). (Except when entering a fax number.)
Enter the administrator password.
(From 5 to 32 characters)
Password
OK
Cancel
(1)
(2)
SYSTEM
SETTINGS
System Settings
Exit
Default Settings
Total Count
Address Control
1/3
List Print
(User)
Fax Data
Receive/Forward
USB-Device Check
Document Filing
Control
Paper Tray
Settings
Printer Condition
Settings
System Settings
Exit
Network Settings
Energy Save Operation Settings
User Control
Device Control
Printer Settings
Copy Settings
2/3
Image Send
Settings
Document Filing
Settings
(A)
System Settings
Exit
3/3
Security Settings
Product Key
Storing/Calling
of System Settings
Enable/Disable
Settings
Change Admini-
strator Password
List Print
(Administrator)
(A)