Specifications
Table Of Contents
- INTRODUCTION
- CONTENTS
- BEFORE INSTALLATION
- SETUP IN A WINDOWS ENVIRONMENT
- SETUP IN A MACINTOSH ENVIRONMENT
- PRINTING FROM WINDOWS
- PRINTER UTILITIES (WINDOWS)
- PRINTING FROM MACINTOSH
- WEB FUNCTIONS IN THE MACHINE
- BEFORE USING THE SCAN TO USB AND NETWORK SCANNER FUNCTION
- USING THE NETWORK SCANNER FUNCTION
- TROUBLESHOOTING
- SHARPDESK CD-ROM (for Windows)
- SPECIFICATIONS
- 34 -
5
PRINTER UTILITIES
(WINDOWS)
PRINTER UTILITY
Printer Status Monitor (for general users)
"Printer Status Monitor" is on the "Software CD-ROM".
This allows the user to check on the computer screen whether or not the machine is able to print.
It provides information on error states such as paper misfeeds and shows the configuration of the machine (number
of trays, etc.) by means of illustrations. Available paper sizes and paper remaining are also indicated.
BEFORE USING THE PRINTER STATUS MONITOR
Note the following points before using the Printer Status Monitor.
Printing via a server
When the first print job is executed after starting up the Printer Status Monitor, the machine's IP address is
automatically set in the Printer Status Monitor.
Direct printing without a server
Install and configure the software as explained in "INSTALLING THE PRINTER DRIVER" in the software setup
guide for network printer. (This is not necessary if the software has already been installed and configured.)
• In order to use the Printer Status Monitor, the machine must be connected to a network.
• To install the Printer Status Monitor, see "INSTALLING THE PRINTER STATUS MONITOR
" (p.16).
Note