User Manual

FINISHER AND SADDLE STITCH FINISHER

3-5

■ Original orientation when using the staple sort or punch function

When using the staple sort or punch function, the original must be placed in the following orientations to enable

stapling or punching in the desired position on the paper.

■ Saddle stitch function (only saddle stitch finisher)

The saddle stitch finisher can automatically place

two staples for centreline binding of prints or copies

and fold them along the centreline.

■ Hole punching (only if a punch module is installed)

When the optional punch module is installed, holes

can be punched in printed pages. (When using the

saddle stitch finisher, pamphlet style stapling and

the punch function cannot be used together.) When

using the punch function, automatic rotation of the

original image does not operate.

For the allowed paper sizes for punching, see the

specifications on page 3-3.

When using the punch function in copy mode,

place the original with the top toward the inside of

the machine. If the original is not placed in this

orientation, punching will not take place at the

correct positions. (See "Standard original

placement orientations" on page 4-4.)

Staple sort

Document feeder Document glass

Punch

Document feeder Document glass

xamp

{Original 1} {Punch positions}

{Original 2} {Punch positions}