Owner's Manual

7-37
SYSTEM SETTINGS
Contents
Printer Settings
Image Send Settings
Item Factory default setting Page
n Printer Settings
7-78
l Default Settings 7-78
 Prohibit Notice Page Printing Enabled 7-78
 Prohibit Test Page Printing Disabled 7-78
 A4/Letter Size Auto Change Disabled 7-78
 Print Density Level 3 7-78
 Bypass Tray Settings 7-78
 Enable Detected Paper Size in Bypass Tray Disabled 7-78
 Enable Selected Paper Type in Bypass Tray Enabled 7-78
 Exclude Bypass-Tray from Auto Paper Select Disabled 7-78
 Job Spool Queuing Enabled 7-78
 Disabling of USB Memory Direct Print Disabled 7-78
 Disabling of Network Folder Direct Print Disabled 7-78
l Interface Settings 7-79
 Hexadecimal Dump Mode Disabled 7-79
 I/O Timeout 60 sec. 7-79
 Enable USB Port Enabled 7-79
 USB Port Emulation Switching Auto 7-79
 Enable Network Port Enabled 7-79
 Network Port Emulation Switching Auto 7-79
 Port Switching Method Switch at End of Job 7-79
l Auto Calibration – 7-80
Item Factory default setting Page
n Image Send Settings
7-81
l Operation Settings 7-81
 Other Settings 7-81
 Default Display Settings Scan (fax when fax is installed)
7-81
• Hold settings for a while after scanning has been
completed
Disabled
• Hold address for a while after scanning has been
completed.
Disabled
 Address Book Default Selection Tab Switch: ABC, Address Type: All 7-81
 Image Orientation Portrait 7-81