Operation Manual

2
CAUTIONS
Symbols in this manual
To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explained below.
Be sure you understand the meaning of the symbols when reading the manual.
WARNING Indicates a risk of death or serious injury.
CAUTION Indicates a risk of human injury or property damage.
Meaning of the symbols
The symbol indicates the need for caution. The specific matter that requires caution is indicated inside the symbol (the
symbol at left indicates "caution: high temperature").
The symbol indicates an action that is prohibited. The specific action that is prohibited is indicated inside or beside the
symbol (the symbol at left indicates "disassembly is prohibited").
The symbol indicates an action that is mandatory.
WARNING
Do not make any modifications to this
machine.
Doing so may result in personal injury or
damage to the machine.
Do not insert or remove the power plug with
wet hands.
This may cause electrical shock.
Do not use a flammable spray to clean the
machine.
If gas from the spray comes in contact with
hot electrical components or the fusing unit
inside the machine, fire or electrical shock
may result.
If a thunder storm begins, switch off the main
power and remove the power plug from the
outlet to prevent electrical shock and fire due
to lightning.
Do not remove the machine casing.
High-voltage parts inside the machine may
cause electrical shock.
Be sure to connect the power cord only to a
power outlet that meets the specified voltage
and current requirements. Also make certain
the outlet is properly grounded. Do not use an
extension cord or adapter to connect other
devices to the power outlet used by the machine. Using
an improper power supply may cause fire or electrical
shock.
*For the power supply requirements, see the name
plate in the lower left corner of the left side of the
machine.
If you notice smoke, a strange odor, or other
abnormality, do not use the machine.
If used in this condition, fire or electrical
shock may result.
Immediately switch off the main
power and remove the power plug
from the power outlet. Contact
your dealer or nearest SHARP
Service Department.
Do not damage or modify the
power cord.
Placing heavy objects on the
power cord, pulling it, or
forcibly bending it will damage
the cord, resulting in fire or
electrical shock.
Do not place a container of water
or other liquid, or a metal object
that might fall inside, on the
machine.
If the liquid spills or the object
falls into the machine, fire or
electrical shock may result.
If a piece of metal or water enters the
machine, switch off the main power and
remove the power plug from the power outlet.
Contact your dealer or nearest SHARP
Service Department. Using the machine in
this condition may result in electrical shock
or fire.
mxm503_us_saf.fm 2 ページ ２００９年２月１８日 水曜日 午前１０時３１分