Quick Start Manual

14
SUPPLIES
* Peripheral device. For more information, see "PERIPHERAL DEVICES" in
"Chapter 1 - BEFORE USING THE MACHINE" in the Operation Guide.
(15) Front cover
Open to replace a toner cartridge.
(16) Bypass tray
Special types of paper and
envelopes can be fed from the
bypass tray.
(17) USB connector (B type)
Supports USB 2.0 (Hi-Speed).
A computer can be connected to
this connector to use the machine
as a printer.
(18) LAN connector
Connect the LAN cable to this
connector when the machine is
used on a network.
(19) USB connector (type A)
This connector is the same as (6).
On the MX-B402, this connector
is set so that it cannot be used
when shipped from the factory.
To use this connector, please
contact your service
representative.
SUPPLIES
(1) Toner collection container
This collects excess toner that
remains after printing.
(2) Toner cartridge
This contains toner for printing.
When the toner runs out in a
cartridge, the cartridge must be
replaced.
(
15
) (
16
) (
17
)
(18)
(19)
(1) (2)
mxb402_us_sta.fm Page 14 Monday, June 14, 2010 3:46 PM