Operation Manual

7-18
SYSTEM SETTINGS►SETTING MODE LIST
 Transaction Report Print Select Setting No Yes
• Single Sending Print Out Error Report Only No Yes
• Broadcasting Print Out All Report No Yes
• Receiving No Printed Report No Yes
 Activity Report Print Select Setting No Yes
• Auto Print at Memory Full Disabled No Yes
• Print Daily at Designated Time Disabled No Yes
• Body Text Print Select Setting Disabled No Yes
X Send Setting No Yes
 I-Fax Reception Report On/Off Setting Disabled No Yes
 I-Fax Reception Report Request Timeout Setting 1 Hour No Yes
 Number of Resend Times at Reception Error 2 Time(s) No Yes
 Maximum Size of E-mail Attachments Unlimited No Yes
 Rotation Sending Setting All Enabled No Yes
 Default Own Number Sending Enabled No Yes
 Printing Page Number at Receiver Enabled No Yes
 Recall in Case of Line Busy No Yes
• Number of Times to Recall When Line is Busy 2 Time(s) No Yes
• Interval to Wait Between Recall Attempts (min.)
When Line is Busy
3 Time(s)
No Yes
 Recall in Case of Communication Error No Yes
• Number of Times to Recall in Case of Error 2 Time(s) No Yes
• Interval to Wait Between Recall Attempts (min.) in
Case of Error
3 Time(s)
No Yes
X Receive Settings No Yes
 Auto Receive Reduce Setting Enabled No Yes
 2-Sided Printing of Received Data Disabled No Yes
 Set Address for Data Forwarding No Yes
• Forwarding to – No Yes
•Direct SMTP Disabled No Yes
• Add Hostname or IP Address. Disabled No Yes
• Hostname or IP Address – No Yes
 Receiving Date & Time Print Disabled No Yes
 A3 RX Reduce Disabled No Yes
 POP3 Communication Timeout 60sec. No Yes
 Reception Check Interval Setting 5 Minute No Yes
• Fax Output Settings Varies depending on the machine
configuration
No Yes
 Allow/Reject Mail or Domain Name Setting No Yes
• Allow/Reject Mail or Domain Name Setting All Invalid No Yes
Setup Items Factory default setting U A