Quick Guide

8
PART NAMES AND FUNCTIONS
Exterior
(1) Automatic document feeder
This automatically feeds and scans multiple originals.
Both sides of 2-sided originals can be scanned at
once.
Illustration A shows the MX-3501N/4501N models.
Illustration B shows the
MX-2300N/2700N/3500N/4500N models.
(2) Document feeder tray
Place the originals in this tray when using the
automatic document feeder.
(3) Finisher
This can be used to staple output. A punch module
can be installed to punch holes in output.
(4) Front cover
Open to replace a toner cartridge.
(5) Operation panel
(6) Exit tray unit (right tray)
When installed, output can be delivered to this tray.
(7) Document glass
This is used to scan books and other originals that
cannot be scanned using the automatic document
feeder.
(8) Output tray (center tray)
Copy jobs and print jobs are delivered to this tray.
(9) Saddle Stitch Finisher
This can be used to staple output. The saddle stitch
finisher can automatically staple output at the center
line and fold the pages to create a pamphlet. A punch
module can be installed to punch holes in output.
(10) Tray 1
This holds paper. Up to 500 sheets of paper can be
loaded.
(11) Tray 2
This holds paper. Up to 500 sheets of paper can be
loaded.
(12) Tray 3 (when a stand/1 x 500 sheet paper drawer
or stand/2 x 500 sheet paper drawer is installed)
This holds paper. Up to 500 sheets of paper can be
loaded.
(13) Tray 4 (when a stand/2 x 500 sheet paper drawer
is installed)
This holds paper. Up to 500 sheets of paper can be
loaded.
(14) Tray 5 (when a large capacity tray is installed)
This holds paper. Up to 3500 sheets of paper can be
loaded. When a stand/1 x 500 sheet paper drawer is
installed, this is tray 4.
(1) (2)(1) (2)
(7)
(5) (6)(4)
(11)(9) (10) (14) (8)(12) (13)
(3)
A B
01-1_Quick(General).fm 8 ページ ２００５年１１月８日 火曜日 午後５時２８分