Owner's Manual

CHANGING THE PAPER SIZE

Pull out the paper tray.

Gently pull the tray out until it stops.

If paper remains in the tray, remove it.

Adjust the guide plates A and B by

squeezing their lock levers and sliding

them to match the vertical and

horizontal dimensions of the paper to be

loaded.

The guide plates A and B are slidable. Slide each guide plate

while squeezing its lock lever.

Fan the paper.

Before loading the paper, fan it well. If the paper is not fanned,

multiple sheets may feed at once and cause a misfeed.

Insert the paper into the tray.

Insert the paper with the print side face up.

However, letterhead and pre-printed paper should be inserted

with the print side face down.

The paper stack must not be higher than the indicator line (no

more than 500 sheets).

If "Disabling of Duplex" is enabled in the system settings (administrator), insert letterhead and pre-printed paper with

the print side face up.

Gently push the paper tray into the

machine.

Push the tray firmly all the way into the machine.

Indicator

line