Owner's Manual

14
5
Press the [COLOR START] key ( )
or the [BLACK & WHITE START] key
().
Scanning begins.
If group copy is selected, copying begins.
If you are using the sort function or other function that requires
all originals to be scanned before the copies are printed, you
must use the same [START] key that you used to scan the first
original to scan each of the remaining originals.
Even if a color mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key ( )
is pressed.
6
Remove the original and place the next
original, and then press the [COLOR
START] key ( ) or the [BLACK &
WHITE START] key ( ).
If you are using the sort function or other function that requires
all originals to be scanned before the copies are printed, you
must use the same [START] key that you used to scan the first
original to scan each of the remaining originals.
Repeat this step until all originals have been scanned.
7
Touch the [Read-End] key.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
or
or
Place next original. Press [Start].
When finished, press [Read-End].
Read-End