Owner's Manual

47
4
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
The current settings of the [Exposure], [Resolution], [Original], [Color Mode], and [File Format] keys appear in the top
half of each key. Touch each key to change the settings.
☞ CHANGING THE EXPOSURE AND EXPOSURE MODE (page 50), CHANGING THE RESOLUTION (page 52),
AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) (page 53), SPECIFYING THE
ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce) (page 54), CHANGING THE COLOR MODE (page
58), CHANGING THE FILE FORMAT (page 59), 7. CONVENIENT FUNCTIONS (page 83)
5
Specify the orientation in which the
original is placed.
To enable the original to be scanned in the correct orientation
(the orientation of the top edge of the original that is shown at
the top of the display), specify the orientation in which the
original was placed in step 2.
(1) Touch the appropriate orientation key.
If the top edge of the original is up, touch the key. If
the top edge of the original is to the left, touch the
key.
(2) Touch the [OK] key.
You will return to the screen of step 4. Touch the [Image
Settings] key to close the menu.
The original orientation is initially set to . If the original was placed with the top edge up, this step is not
necessary.
Special Modes
USB Mem. Scan
Mode Switch
Image
Settings
File Name
Auto
Exposure
200X200dpi
Resolution
PDF/PDF
File Format
Mono2/Auto
Color Mode
Special Modes
Original
Auto 8 x11
1
/
2
(1) (2)
USB Mem. Scan
Original
OK
Scan Size Send Size
100%
Auto
Image Orientation
Auto 8 x11
1
/
2
2-Sided
Booklet
2-Sided
Tablet
(1) (2)