Operation Manual, User's Manual

1-124
BEFORE USING THE MACHINE►MAINTENANCE
CLEANING THE BYPASS FEED ROLLER
If paper misfeeds frequently occur when feeding envelopes or heavy paper through the bypass tray, wipe the surface of
the feed roller with a clean soft cloth moistened with water.
CLEANING THE PAPER FEED ROLLER
If lines or other dirt appear on the scanned original when the automatic document feeder is used, wipe the surface of the
roller with a clean soft cloth moistened with water.
CLEANING THE FEED ROLLER OF TRAY 1
If the paper in tray 1 frequently misfeeds, press down the center of the pressure plate until it locks, and wipe the surface
of the feed roller with a clean, soft cloth moistened with water.
1
Pull out the paper tray 1.
Hold the tray with both hands and slowly pull out and up at a
slight angle.
The feed roller cannot be removed unless tray 1 is removed.
2
Clean the feed roller.