Operation Manual MD/CD COMPONENT SYSTEM MD-X60H

<P=004>

(Continued)

■ Preset tuning

You can store up to 40 stations in memory (40 stations consisting of any combi-

nation of FM and AM stations you like) and recall them at the push of a button.

2,4

To enter stations into memory:

1 Perform steps 1 - 5 in the "Tuning" section.

2 Press the ENTER button.

3 Within 10 seconds, turn the jog dial to make the preset channel number flash

in the display.

● Store the stations in memory, in order, starting with preset channel 1.

4 Within 10 seconds, press the ENTER button to store that station in the selected

station preset number memory.

● If the preset number indicators go out before the station is memorised, repeat

the operation from step 2.

5 Repeat steps 1 - 4 to set other preset stations, or to change a preset station.

● When a new station is stored in the selected station preset number memory,

the contents previously memorised will be erased.

To recall a memorised station:

1 Press the TUNER (BAND) button.

2 Press the DIRECT KEY on the remote control or turn the jog dial on the main

unit to recall the preset channel number.

● The frequency will appear in the display.

For example, to select 5:

Press the "5" button.

For example, to select 23:

①Press the 10 button.

②Within 5 seconds, press the "2" button.

③Within 5 seconds, press the "3" button.

ON/

STAND-BY

TRACK

EDIT

ENTER

To erase all memorised stations:

When the unit is in the stand-by mode, hold and press the TRACK EDIT and

ENTER buttons, and then press the ON/STAND-BY button.

● All of the memorised stations will be erased.

MD-X60H(SUK) TINSE0227AWZZ