Operation Manual

E27
EnglishDeutschFrançaisItalianoEspañolEnglish
Connecting the TV to a power source
CAUTION!
- When connecting, ensure that the TV is switched off.
- Use only the power cord supplied with the TV.
- Be careful not to over bend the cable or add extension cords as this could lead to a malfunction.
See page E10 for information on removing/replacing the terminal cover.
1.Connect the power cord (supplied) to the power input terminal.
2.Place the power plug into an AC outlet.
Note:
- If the TV does not operate, disconnect the power cord from the AC outlet and reconnect it again. The
setup must be completed in the proper order for the TV to function.
Power cord (supplied)
AC outlet
Power input terminal
Power cord (supplied)
LD-26SH1U_gb_01.P65 2005/01/21, 11:2027