Operation Manual, AirPrint Guide

5
AirPrint Guide
AirPrint Settings
Set this option to use AirPrint.
In "Settings (administrator)", select [System Settings] → [Network Settings] → [External Print Services Settings] →
[AirPrint Settings].
AirPrint (Print), AirPrint (Scan), AirPrint (Fax Send)
Select these settings to use the AirPrint functions.
mDNS
Enable or disable mDNS. When mDNS is disabled, the machine will not appear in the list of printers when AirPrint is
used to print.
This setting is linked to [
System Settings ] → [ Network Settings ] → [ Services Settings ] → [mDNS Settings] → [mDNS] in
"Settings (administrator)".
IPP
Specify whether or not the IPP port of the machine is enabled. This setting is linked to [ System Settings ] → [Security
Settings] → [Port Control] → [IPP] in "Settings (administrator)".
IPP-SSL
Specify whether or not the IPP-SSL port of the machine is enabled. This setting is linked to [ System Settings ] →
[Security Settings] → [Port Control] → [IPP-SSL] in "Settings (administrator)".
Service Name
Set the name of the printer that appears in the application when AirPrint is used.
This setting is linked to [
System Settings ] → [ Network Settings ] → [ Services Settings ] → [mDNS Settings] → [Service
Name] in "Settings (administrator)".
Machine Location
Enter the machine installation location information that is sent to the application when AirPrint is used.
This setting is linked to Machine Information Page in Setting mode.
geo URI (RFC 5870)
Enter the geographic location of the machine.
Enter the location information in the format specified by the geo URI standard.
Default User Name for User Authentication
If user authentication is enabled on the multifunction machine, set the device user name.
Device Status, Firmware Version, SSL Settings, Certificate Management, User List
Click each of the items to go to the settings of Device Status, Firmware Version, Setting of SSL, Certificate
Management, and User List.
AirPrint and the AirPrint logo are trademarks of Apple Inc.