Operation Manual, User's Manual

2-47
COPIER►BASIC PROCEDURE FOR MAKING COPIES
COPYING BOTH SIDES OF A CARD AS A SINGLE PAGE
(CARD SHOT)
This function copies the front and reverse sides of a card on one sheet, not on separate sheets.
This function is convenient for making copies for identification purposes and helps save paper.
• To change the default original size during Card Shot:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Card Shot Settings].
Specify a value from 25 mm (1") to 210 mm (8-1/2") in increments of 1 mm (1/8") for both the X (horizontal) and Y (vertical)
dimensions of the original.
• To use Card Shot in Easy mode:
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Easy Mode
Settings] → [Easy Copy].
1
Select the paper to be used for card shot.
Set a paper by referring to the "SELECTING THE PAPER TRAY FOR COPYING (page 2-12)".
In Easy mode, tap the [Card Shot] key and go to step 4.
2
Tap the [Detail] key to change to normal mode.
► CHANGING MODES (page 1-11)
3
Tap the [Others] key, and tap the [Card Shot] key.
Back
Front
Example of a portrait copy
Example of a landscape copy