Operation Manual, User's Manual

2-37
COPIER►BASIC PROCEDURE FOR MAKING COPIES
MAKING COPIES USING THE BYPASS TRAY
MAKING COPIES USING THE BYPASS TRAY
In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special
media.
For detailed information on paper that can be loaded into the bypass tray, see "APPLICABLE PAPER TYPES (page 1-90)".
For precautions on loading paper into the bypass tray, see "LOADING PAPER INTO THE BYPASS TRAY
(page 1-97)".
Prohibit feeding of paper from the bypass tray when performing duplex copy.
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Disabling of Bypass-Tray
in Duplex Copy].
Disables the use of the bypass tray when making 2-sided copies.
The bypass tray is often used to feed label sheets, transparency film, and other special media for which 2-sided copying is
prohibited. If a sheet of one of these special media enters the reversing unit, a misfeed or damage to the unit may result. If
special media for which 2-sided copying is prohibited is often used, it is recommended that you enable this setting.
1
Load paper into the bypass tray.
► LOADING PAPER INTO THE BYPASS TRAY (page 1-97)
When you load paper in the bypass tray, the current bypass tray paper type and size appear. To change the paper type
or size, tap the [Type] or [Size] key.
For the settings, refer to "SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON BYPASS TRAY (page 2-38)".
If paper is already loaded in the bypass tray and you want to change the tray to be used to the bypass tray, go to step 2.
2
Tap the [Paper Select] key, and tap the bypass tray key.
The bypass tray key shows the previously loaded paper size and type.
If the paper type and size are okay, go to the next step.
If you need to change the paper type or size setting to match the paper placed in the bypass tray, change as explained
in "SPECIFYING A TYPE AND SIZE OF PAP
ER LOADED ON BYPASS TRAY (page 2-38)".
► SELECTING THE PAPER TRAY FOR COPYING
(page 2-12)
3
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT F
EEDER (page 1-107)
► DOCUMENT GLASS (page 1-109)
4
Tap the [Colour Start] or [B/W Start] key to start copying.
Easy
Copy
10:15
Operation
Guide
Enlarge
Display Mode
Settings Total Count Brightness
Adjustment
Job Status
Toner Quantity Bk
Current Bypass Tray Settings
are as follows.
Type:
Tap [Change] to change current paper
setting and select other paper types.
Change OK
Size: A4
Plain Paper 1
(60 - 79 g/m
2
)
Toner Quantity
Bk
C
M
Y
Sharp OSA
Current Bypass Tray Settings are as follows.
Bypass Tray
Type:
OK
Size:
A4
Plain Paper 1
(60 - 89 g/m
2
)