Operation Manual, User's Manual

2-31
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Specifying the image dimensions
1
Perform steps 1 to 2 in Using the preset ratio key (page 2-27).
2
Tap the [by Size] key.
3
Specify the X and Y dimensions of the
image size and those of the output
size.
Check that a paper size suitable for the ratio is selected.
After the settings are completed, tap .
Tap the image size and output size areas, and enter the sizes using the numeric keys.
• If you have entered an incorrect size:
Tap the [C] key on the numeric keys that appears when you tap the entry area, and set to the correct size.
• To cancel all settings:
Tap the [CA] key.
B43
4A3
inch inch
inch inch
Preview
2-Sided Copy
Background Adjustment
Change Paper Feed Tray
Paper Select
Change Size/Direction.
Original
Others
1
No. of copies
CA
Start
Colour
Start
B/W
Copy Ratio
by Size
The copy ratio is calculated from specified sizes.
Enter the image size and the finished size.
Copy Ratio
Image Finished
Not Input Not Input
mm mm
Not Input Not Input
mm mm