Setup guide

6
Initial installation
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary
depending on your TV installation and connection.
n Connect an antenna cable to the
antenna terminal.
* Only connect a satellite antenna
to models capable of receiving
satellite broadcasts
o If necessary, insert a CA card into
the CI slot to watch scrambled
broadcasts.
p Plug the AC cord into the AC
outlet.
H For 60/70 inch models
Place the TV close to the AC
outlet, and keep the power plug
within reach.
Product shape varies in some
countries.
H For 80 inch models
Place the TV close to the AC
outlet, and keep the power plug
within reach.
Product shape varies in some
countries.
q Press a on the TV.
r Run the initial auto installation.
Follow the guide on the TV screen
to set the following settings.
Language setting
Home/Store setting
Country setting*
1
PIN setting
Channel search setting
Digital search
Terrestrial
Cable*
2
Analogue search
Satellite search*
1
I Some models do not have this setting.
J Refer to the operation manual stored
in the TV for details on the settings for
cable broadcasts.
Start searching
channels
Viewing the operation
manual stored in the TV
Refer to the operation manual
(JPEG) stored in the TV for
details.
1 Press (HOME) and the
“HOME” screen will be
displayed.
2 Press a/b/c/d to select
“Manual”, and then press
;.
3 Select the folder/file you wish
to view.
NOTE
To change the language of the
operation manual, please select the
folder of the language to which you
would like to change.
The language of the operation manual
will not change even if the OSD
language in the language settings from
the TV main menu is changed.
If you open the operation manual during
USB-recording, a caution screen will be
displayed that confirms your consent to
stop recording.
When the operation manual is
displayed, returning to the “HOME”
screen is not possible by pressing 6
(Return). Press
(HOME) on the
remote control to return to the “HOME”
screen.