MANUAL DE OPERACIÓN SHARP CORPORATION OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN FRANÇAIS LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO ESPAÑOL MODE D'EMPLOI Sharp Plaza, Mahwah, New Jersey 07495-1163 ENGLISH OPERATION MANUAL SHARP ELECTRONICS CORPORATION LC-70UD1U IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce mode d’emploi avant de commencer à utiliser l’appareil.
Dimensional Drawings 2 7/32 (56)*2 4 1/2 (114)*3 62 9/64 (1578) Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) 21 3/16 (538) 34 7/64 (866)*1 37 13/32 (950) 39 7/32 (996) 60 19/32 (1539)*1 6 5/16 (160) 14 47/64 (374) 27 9/16 (700) Skype™ es compatible con este televisor. Para conocer más detalles, consulte: • Para el manual de operación: http://www.sharpusa.com (EE.UU.) http://www.sharp.ca (Canadá) http://www.sharp.com.
IMPORTANT INFORMATION Model No.: Serial No.: WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY INSTRUCTIONS • • • • To prevent fire, never place any type of candle or flames on the top or near the TV set. To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items. Do not display a still picture for a long time, as this could cause an afterimage to remain. To prevent fire or shock hazard, do not expose this product to dripping or splashing.No objects filled with liquids, such as vases, should be placed on the product.
IMPORTANT SAFETY INSTRUCTIONS 3D Glasses Prevention of accidental ingestion • Keep the accessory out of the reach of small children. Small children can accidentally swallow these parts. – If a child accidentally swallows any of these parts, seek immediate medical attention. Accessories Supplied Accessories Make sure the following accessories are provided with the product. Do not disassemble • Do not disassemble or modify the 3D Glasses except when recycling the batteries. Do not modify the 3D Glasses.
Contents IMPORTANT INFORMATION .............................. 1 DEAR SHARP CUSTOMER ................................. 2 IMPORTANT SAFETY INSTRUCTIONS ...........2-4 Accessories.......................................................... 4 Supplied Accessories .................................... 4 Optional Accessories ..................................... 4 QUICK REFERENCE Attaching the Stand ....................................... 6 QUICK INSTALLATION TIPS ..........................
QUICK REFERENCE QUICK INSTALLATION TIPS Attaching the Stand • Before attaching (or detaching) the stand, unplug the AC cord. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 2 Confirm that there are 11 screws (4 long screws, 4 middle screws and 3 short screw) supplied with the stand unit.
Preparation QUICK REFERENCE Installing Batteries in the Remote Control Unit If the remote control fails to operate TV functions, replace the batteries in the remote control unit. 1 Using the Remote Control Unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. Open the battery cover. Antennas To enjoy a clearer picture, use an outdoor antenna.
Part Names TV (Front) TV (Rear) *1 RS-232C terminal DuoBass PC IN terminal VIDEO IN 2 terminals VIDEO IN 1 terminals COMPONENT IN terminals OPC sensor *1 3D indicator *3 Remote control sensor *1 TIMER indicator *4 AUDIO OUT terminal *1 POWER indicator *2 USB 1 terminal *3 *1 OPC: Optical Picture Control (See page 21.) *2 This indicator lights blue when the TV is turned on. You can also turn off the indicator by setting "Icon Light Up Setting" to "Off". (See page 24.
Part Names 1 POWER: Switch the TV power on or enter standby. (See page 13.) Remote Control Unit 18 19 1 2 3 20 21 4 5 2 TV, STB, DVD•VCR, AUDIO: Switches the remote control for TV, STB, BD, DVD, VCR and AUDIO operation. (See pages 37 to 38 for details.) * To enter the code registration mode, you need to press an appropriate button (STB, DVD•VCR or AUDIO) and DISPLAY at the same time. 3 External equipment operational buttons: Operate the external equipment.
Introduction to Connections Types of Connection Displaying an External Equipment Image For connecting the TV to external equipment, use commercially available cables. To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. • The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products. ■ Connecting to video equipment or PC Image quality differs depending on the terminal used.
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. (See pages 10 and 15.) For connecting the TV to external equipment, use commercially available cables.
Connecting to External Equipment Connecting a Surround System/Audio System Connecting a PC ■ When connecting an AV amplifier for a surround system HD Cable/Satellite set-top box Refer to page 42 for a list of PC signals compatible with the TV.
Watching TV Turning On/Off the Power 3 Initial Installation Press a/b to select the time zone where you are using the TV, and then press ENTER. When you turn on the TV for the first time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 7.) 2. Connect the antenna cable to the TV. (See page 7.) 3.
Watching TV CH Search (Channel search) Channel auto search makes the TV look for all channels viewable in the set area. 8 When "Air" is selected in Antenna setting: Press c/d to select "Start", and then press ENTER. Start Cancel When "Cable" is selected in Antenna setting: 1 Press a/b to select "Analog & Digital Search Start" to search both analog and digital broadcasts, or to select "Analog Search Start" to search only analog broadcasts, and then press ENTER.
Direct Button Operation Changing Channels MUTE You can change channels in several ways. Method 1 Using CHU/V on the remote control unit or on the TV. Method 2 Using remote control buttons 0-9, • (DOT). Examples: To select a 1 or 2-digit channel number (e. g., Channel 5): Press 5 ENT. To select a 3-digit channel number (e. g., Channel 115): Press 1 1 5 ENT. To select a 4-digit channel number (e. g., Channel 22.1): Press 2 2 • (DOT) 1 ENT. Method 3 Selecting the program from the Channel list.
Direct Button Operation ■ Digital broadcasting audio mode The types of audio transmitted in a digital broadcast include SURROUND as well as MONO and STEREO. In addition, it is possible for multiple audio tracks to accompany a single video track. NETFLIX Displays the Netflix screen. Press NETFLIX. NOTE • To enjoy Netflix, you need to make: —a broadband Internet connection (See page 43.) —settings of Internet Setup (See pages 43 to 44.) —adjustments for Netflix (See page 46.
Direct Button Operation Closed Captions and Digital Closed Captions Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider).
Direct Button Operation ■ For USB-Video, SD-Video, DLNA-Video or Internet applications Example: Screen size images Input signal Auto Original Stretch Keeps the original aspect ratio in a full screen display. Displays an image by an original size. An image fully fills the screen. Zoom Stretch Dot by Dot An image fully fills the screen. Detects the resolution of the signal and displays an image with the same number of pixels on the screen.
On-Screen Display Menu LCFONT embedded System Options : Select Initial Setup ENTER : Enter RETURN Picture Settings Information : Back MENU : Exit On-Screen Display Menu Operation Menu Picture Settings Example AV MODE (Changing Pic.Quality) System Options : Select [STANDARD] Initial Setup ENTER : Enter RETURN Picture Settings Information : Back MENU : Exit Menu Picture Settings THX Room Mode Setting AV MODE (Changing Pic.
On-Screen Display Menu Audio Settings Menu Items Example Picture Settings Example Picture Settings Menu System Options Menu Audio Settings Audio Settings Initial Setup System Options Menu Example System Options Auto Volume Picture Settings Example Initial Setup Menu Initial Setup View Option EZ Setup 3D Setup Broadcasting Setup AQUOS LINK Setup Individual Setup Internet Setup Terminal Setting Wall Mount Audio Setup Menu Design Reset [Off] Treble AV MODE (Changing Pic.
On-Screen Display Menu Adjusts the picture to your preference with the following picture settings. NOTE • For operating the on-screen display menu, see page 19. Selected item Backlight Contrast Brightness Color Tint Sharpness c button The screen dims For less contrast For less brightness For less color intensity Skin tones become reddish For less sharpness Color Temp.
On-Screen Display Menu Digital Noise Reduction Produces a clearer video image. Auto: Automatically adjusts the level of noise reduction. High/Middle/Low: You can select a desired level for viewing a clearer video image. Off: No adjustment. You can adjust the sound quality to your preference with the following settings. NOTE • For operating the on-screen display menu, see page 19. NOTE Selected item • "Digital Noise Reduction" is not available when you set AV MODE to "PC" or PC format is being input.
On-Screen Display Menu Power Control No Signal Off NOTE When this function is enabled, the TV automatically shuts down if no signal is received for more than 15 minutes. • For operating the on-screen display menu, see page 19. NOTE Power control setting allows you to save energy. Audio Only When listening to music from a music program, you can turn the screen off and enjoy audio only.
On-Screen Display Menu Input Label Lets you set the input terminal displayed when using the INPUT list or channel display. Press a/b/c/d to select the new name for the input mode. • Using the software keyboard, you can enter up to 10 characters for text. (See page 44.) NOTE • You cannot change labels if the input source is TV, Home Network (DLNA) or SD/SDHC/USB.
On-Screen Display Menu Boot Picture With this function activated, the SHARP logo will be displayed when you turn on the TV. NOTE • This function is not available when the TV is set to "Standby Mode". Response Tone With this item set to "On", the TV will give off operation sound when you use the SmartCentral function. NOTE • If an external speaker is used, the operation sound will not be heard. Demo Mode You can select the image from several types of demo mode.
On-Screen Display Menu Bluetooth Setup Set this function when using the bluetooth devices with your TV. See page 46 for how to use the devices. NOTE • When you use the Bluetooth device with your TV for the first time, you must make pairing between the device and the TV. Once the pairing is correctly carried out, the Bluetooth device will be registered on the TV. Keyboard Setting/Mouse Setting You can add, delete or select Bluetooth devices in the registration.
On-Screen Display Menu ■ TV Parental Guidelines Canadian Rating Systems (Canadian English ratings and Canadian French ratings) Example • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On-Screen Display Menu 3 Manual Update Select the method for manually updating the software. USB Update: Updates the software using a USB memory device containing the update file. (See "Updating the Software with a USB Memory Device".) Network Update: Downloads the update file via the network and then updates the software. (See page 29.) Press ENTER to start checking the data in the USB memory device. 5 To update the TV software with the update file, select "Yes", and then press ENTER.
Enjoying 3D Image Viewing On-Screen Display Menu ■ Updating the Software via the Network 1 Press a/b on the Manual Update screen to select "Network Update", and then press ENTER. 3 After the update file is downloaded, the software update process begins. Downloading the latest software.. • The TV connects to the network and checks for updates. • To cancel, press ENTER. Update Version XXXXXXXX Connecting to Internet.. Checking for the latest software version..
Enjoying 3D Image Viewing Display Methods for 3D and 2D Images Display method Example display 2D ➝ 3D 3D mode (using the 3D Glasses) Side by Side Top and Bottom 2D mode (without using the 3D Glasses) Ending 3D Image Viewing Viewing 3D Images Description • Converts normal 2D images into 3D images. • Creates 3D images from 3D images displayed side by side. The image is split into a left and right image, and then the images are stretched and displayed sequentially to create a 3D image.
Enjoying 3D Image Viewing Watching 2D Images in 3D You can convert normal 2D images into 3D images. 1 Press 3D. 2 Press c/d to select "2D➝3D", and then press ENTER. 3 Turn on the 3D Glasses and place them on your head. Configuring the TV Settings to Enhance 3D Image Viewing You can adjust the 3D image to the desired image quality and make various settings for 3D image viewing. • Set the 3D viewing settings with "System Options" > "3D Setup". NOTE NOTE • The TV returns to 2D mode after 1 hour has passed.
Enjoying 3D Image Viewing Enjoying Photo/Music/Video Playback NOTE You can connect the TV to a USB memory device, USB hard drive, SD memory card or home network (DLNA) server to enjoy viewing pictures, listening to music, and watching videos. • Appropriate 3D Glasses are required to view 3D images. Purchase 3D Glasses for use with Sharp brand 3D LCD TVs. ■ 3D Glasses lenses • Do not apply pressure to the lenses of the 3D Glasses. Also, do not drop or bend the 3D Glasses.
Enjoying Photo/Music/Video Playback Connecting a Home Network (DLNA) Server Connect the TV to the home network (DLNA) server using an ETHERNET cable. • You can also connect a Home Network (DLNA) server by using a wireless LAN.
Enjoying Photo/Music/Video Playback Playing Back Files on a USB Memory Device/ SD Memory Card/Home Network (DLNA) Server NOTE • The screen images in this section are for the USB mode. It may be slightly different in the SD mode or Home network (DLNA) mode. Viewing Individual Photos Photo Mode The photo selected on the thumbnail selection screen is displayed. Viewing Thumbnails Buttons for individual display operation Example Buttons ...
Enjoying Photo/Music/Video Playback Example ... music 1 music 2 music 3 SONG_01.MP3 SONG_02.MP3 SONG_03.MP3 SONG_04.MP3 SONG_05.MP3 SONG_06.MP3 SONG_07.MP3 SONG_03.MP3 Buttons for playing mode USB Menu or SD Menu Music Mode music 4 music 5 I I I I I I I ... On the menu to be displayed in USB or SD mode, use a/b to select an item and make settings to your preferences.
Enjoying Photo/Music/Video Playback USB Operation Panel/Home Network (DLNA) Operation Panel You can use the operation panel for video playback operations. You can call up this operation panel from "System Options" > "View Option". Example Audio Title CC Resume jump NOTE • Reverse/fast forward continues from one file to another during continuous playback. • Use "CC" on the operation panel to change the Closed Caption display.
Other Viewing Options Presetting Remote Control Function You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, BD, DVD, LD) using the presetting manufacturer function of your remote control unit. Manufacturer codes STB BRAND ANVISION CABLE STAR DISH NETWORK DIRECTV EAGLE G.INSTRUMENT GERROLD JERROLD MAGNAVOX MOTOROLA OKA SIGMA PANASONIC PHILIPS PIONEER RANDTEK RCA S.
Using AQUOS LINK Other Viewing Options Operating the Connected Equipment To operate the connected equipment, press STB, DVD•VCR or AUDIO to select your device. (STB (cable/satellite set-top box), BD, DVD, VCR or AUDIO.) The remote control unit button will function as follows. • When you operate VCR, DVD or BD, press INPUT to select the terminal connected to your device. • CABLE and SAT cannot be selected at the same time.
Using AQUOS LINK AQUOS LINK Setup Make the settings to use AQUOS LINK. Set the settings with "System Options" > "AQUOS LINK Setup". For operating the on-screen display menu, see page 19. AQUOS LINK Control Select AQUOS LINK Control to disable the AQUOS LINK function even when an AQUOS LINKcompatible HDMI device is connected to the TV. This function prevents the device from starting to operate unexpectedly. Auto Power On If this is activated, the One Touch Play function is enabled.
Using AQUOS LINK Device Operation Panel Link Booking (Rec. Book) You can use the device operation panel to control playback operations. Press a/b/c/d to select the desired operation. You can call up the AQUOS LINK-compatible recorder's EPG and preset timer recordings using the TV's remote control. Select the program on the recorder's EPG. NOTE • You can use a/b/c/d, ENTER, RETURN, EXIT and the colored buttons.
Using a PC Adjusting the PC Image You can adjust the position of the image input from a PC the settings with "System Options" > "Terminal Setting" > "PC input". Auto Sync. (for Analog PC Input Mode Only) For automatically adjusting the PC image. Yes: Auto Sync. starts and "Now adjusting the image." displays. No: This function does not work. NOTE • When "Auto Sync." is successful, "Completed" displays. If not, "Auto Sync." failed. • "Auto Sync." may fail even if "Completed" displays. • "Auto Sync.
Using a PC ■ Command table CONTROL ITEM • Commands not indicated here are not guaranteed to operate. CONTROL ITEM COMMAND POWER ON COMMAND R SETTING POWER SETTING INPUT SELECTION S CONTROL CONTENTS _ _ _ Off The Power On command rejected. 1 _ _ _ On [RS-232C] The Power On command accepted. 2 _ _ _ On [IP] The Power On command accepted. 0 _ _ _ Power Off It shifts to standby. 1 _ _ _ Power On Power On G D x _ _ _ (Toggle) It input-switches by the toggle.
Using the Internet By connecting your TV to a broadband system, you can access the Internet from the TV. • You can enjoy a variety of streaming content and Internet applications. (See page 46.) Internet Setup NOTE • You may not be able to view 3D images when accessing the Internet. Connecting to the Internet • To connect your TV to the Internet, you must have a broadband Internet connection.
Using the Internet ■ IP Setup You can make adjustments manually for the IP. • Check that numbers are displayed for each setting. • If there are any settings without numbers, specify the numbers by following the on-screen instructions. • Input the IP address by using remote control buttons 0-9. Example Change : : : : : • Input the 4-digit secret number by using remote control buttons 0-9.
Using the Internet Using the Browser 1 Using the Toolbar Pages with security protection, “ ” will be displayed. You can use the toolbar to control the browser and to specify settings. 1 Press D to control the toolbar. 2 Press c/d to select a function, and then press ENTER. Press SmartCentral to display the application window. • Press SmartCentral again to display a list of applications by category. 2 Press c/d(or a/b) to select the Web Browser icon, and then press ENTER.
Using the Internet Browser Settings You can check or modify your browser settings from the Browser menu. 1 Press D to display the toolbar. 2 Press c/d to select " " in the toolbar, and then press ENTER. 3 Press a/b to select and confirm the item you want to set. 4 Press a/b/c/d to specify the required setting, and then press ENTER. 5 Press D to exit. Home Page: You can set the page displayed as your home page when the browser starts up.
Using the Internet Appendix When you access the Internet application for the first time, the following appears. • This message is available only in English. DISCLAIMERS • This SHARP device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties.
Appendix CABINET WALL 2 61/64 (75) 15 3/4 (400) CAUTION • Install your wall mount on a solid wall perpendicular to the floor. Do not attach the wall mount to plaster board or similarly weak materials. Please contact your nearest retailer/adviser for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury. Always have two people mount the TV on a wall.
Appendix Troubleshooting Problem Problem • No sound Possible Solution Possible Solution • • • • • • No power • Check if you pressed POWER on the remote control unit. • Is the AC cord disconnected? Page 6 • Has the power been turned on? Page 13 • Unit cannot be operated. • External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes.
Appendix • No broadcast now. E203 • Check the broadcast time in the program guide. • An incompatible audio signal has been received. Check the output device settings. — • This message is displayed when an audio format other than PCM, DTS or Dolby Digital is input. - Set the audio output format of connected external HDMI equipment to PCM, DTS or Dolby Digital. - Refer to the operation manual of the external equipment for setting details.
Specifications TV Item LCD panel TV Function Size Resolution TV-standard (CCIR) Receiving Channel VHF/UHF CATV Digital Terrestrial Broadcast (8VSB) Digital cable*1 (64/256 QAM) Audio multiplex Audio out Side Back panel vertical inputs Terminals Back panel surface inputs Back panel horizontal inputs SD card slot HDMI IN 1 HDMI IN 2 HDMI IN 3 HDMI IN 4 AUDIO OUT USB 1*2 COMPONENT IN VIDEO IN 1 VIDEO IN 2 PC IN RS-232C ANT/CABLE AUDIO IN DIGITAL AUDIO OUT ETHERNET USB 2*2 OSD language Power Requireme
Specifications Wireless LAN Bluetooth This TV has received the following certifications. - Wi-Fi CERTIFIED™ (certification program from the Wi-Fi Alliance® ) - Wi-Fi Protected Setup™ (certification program from the Wi-Fi Alliance® ) FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Trademarks • SmartCentral is a registered trademark of Sharp Corporation. • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
Dimensional Drawings 2 7/32 (56)*2 4 1/2 (114)*3 62 9/64 (1578) Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) 21 3/16 (538) 34 7/64 (866)*1 37 13/32 (950) 39 7/32 (996) 60 19/32 (1539)*1 6 5/16 (160) 14 47/64 (374) 27 9/16 (700) Skype™ es compatible con este televisor. Para conocer más detalles, consulte: • Para el manual de operación: http://www.sharpusa.com (EE.UU.) http://www.sharp.ca (Canadá) http://www.sharp.com.
MANUAL DE OPERACIÓN SHARP CORPORATION OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN FRANÇAIS LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO ESPAÑOL MODE D'EMPLOI Sharp Plaza, Mahwah, New Jersey 07495-1163 ENGLISH OPERATION MANUAL SHARP ELECTRONICS CORPORATION LC-70UD1U IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce mode d’emploi avant de commencer à utiliser l’appareil.
