Operation Manual

8
TV (front/side view)
Illumination LED*
1
Remote control sensor (Page 7)
OPC sensor (Page 36)
a (Standby/ON)
MENU (Menu)
b (Input source)
:r/s
(Programme
[Channel])
i+/- (Volume)
This panel emits a signal towards the 3D glasses you wear when viewing 3D images.
Refer to page 76 for details.
I 3D mode: Blue illumination
2D mode: White illumination
TV (rear view)
USB 3 (WIRELESS LAN) port
USB 2 (HDD) port
ETHERNET (10/100) terminal
Satellite antenna terminal
(857 series only)
Antenna terminal
DIGITAL AUDIO OUTPUT
terminal
HDMI 2/PC AUDIO (L/R)
jack*
2
J The HDMI 2 and PC terminals can both use the same audio input terminal (HDMI 2/PC AUDIO
(L/R)). However, the proper item must be selected in the “Audio select” menu (refer to page 47 for
details).
Important information:
Satellite services are only available for the 857 model series.
TV (rear view) — continued
SD CARD
(VIDEO STORE) slot
RS-232C terminal
PC terminal
EXT 2 (VIDEO/AUDIO
(L/R)) terminal
EXT 1 (RGB) terminal
EXT 3 (Component/
AUDIO (L/R)) terminal
OUTPUT (Headphones/
AUDIO (L/R)) terminal*
4
USB 1 port
HDMI 1 (HDMI/ARC)
terminal
HDMI 3 (HDMI) terminal
HDMI 2 (HDMI) terminal
HDMI 4 (HDMI/MHL)
terminal
C.I. (COMMON
INTERFACE) slot
MAIN POWER
switch*
3
K When the MAIN POWER switch is turned off (a), the amount of electric power consumed will
be reduced to 0.01 W or less. However, unlike when unplugging the AC cord, the power is not
completely disconnected.
L When the headphone is connected to the OUTPUT terminal, the audio can be output from the
speakers (Page 48).
WARNING
• Excessive sound pressure from earphones and headphones can cause hearing loss.
• Do not set the volume at a high level. Hearing experts advise against extended listening at high
volume levels.
NOTE
• Use a product with the specified dimensions for optimal connection to HDMI cable/USB device.
− HDMI: Body: (depth) 12 mm or less/(length) 32 mm or less
− USB: Body: (depth) 10 mm or less/(length) 57 mm or less
Connector: (depth) 7 mm or less
Part names and functions