LC-46D92U, LC-52D92U LIQUID CRYSTAL TELEVISION OPERATION MANUAL

NOTE

• When this function is not available, “No displaying still

image available.” will display.

• The still image automatically goes out after 30 minutes.

• If you are using the freeze function and a broadcast

activates the V-CHIP BLOCK, the freeze function will be

cancelled and a V-CHIP BLOCK message will appear.

Presetting remote control function

You can operate the connected AV products (AV

Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD)

using the presetting manufacturer function of your

remote control unit.

Press FREEZE again to cancel the function.

Other viewing options

Freezing images

Allows you to capture and freeze a moving image that

you are watching.

Press FREEZE.

• A moving image is captured.

Presetting manufacturer codes

After the LED for your device lights up, press

FUNCTION and DISPLAY at the same time

to enter the code registration mode. The LED

will blink.

Press FUNCTION until the LED for your

device lights up.

After registering the code, the LED will stop

blinking then turn off after one second. (If you

perform an incorrect operation, the LED will

blink quickly then turn off.)

Press 0–9 to enter the manufacturer code.

(See page 50.)

• Preset mode is ﬁ nished once the LED no longer

lights up.