User Manual

Using external equipment

Displaying broadcasts via an HDTV tuner

To watch an HDTV tuner image, select “INPUT3” from

“INPUT SOURCE” menu using b on the remote

control unit or INPUT on the Display.

Then select “INPUT3” on “Input Select” in the menu to

set the correct input signal type. (See page 51.)

The setting is stored and can be selected in the “INPUT

SOURCE” menu.

NOTE

• Each time b is pressed, the input source toggles.

• If the HDTV tuner image does not come in clearly, you

may need to change the input signal type setting on the

“Input Select” menu.

(For INPUT3 signal)

TV MENU

Option

Input Select

AUTO

COMPONENT

S-Video

Video

INPUT SOURCE

INPUT1

INPUT2

INPUT3

INPUT4

AVC System (rear view)

HDTV tuner

Watching broadcasts via an HDTV tuner

Connecting an HDTV tuner

You can use the INPUT 3 terminal when connecting an HDTV tuner and other audiovisual equipment.

Component cable

(commercially available)

AV cable (commercially available)

S-video cable

(commercially available)

When using component

cable, select

“COMPONENT” for

“Input Select” in the

menu.