User Manual

18
Basic adjustment settings
Auto installation
You can run auto installation again, even after setting
up the preset channels.
Press MENU and the MENU screen displays.
1
2
5
3
––––
Press c/d to select “Setup”.
MENU
[
Setup
...
Auto Installation
]
Setup Option
Child Lock
Input Label
Auto Installation
Programme Setup
Position
Language
6
Press a/b to select “Yes”, and then press
ENTER.
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Press a/b to select the desired sound
system, and then press ENTER.
You do not need to do anything during the
auto search.
“Search is completed.” is displayed. Press
MENU to exit.
Press a/b to select “Auto Installation”, and
then press ENTER.
4
If you have already set the password, enter
it here.
• See page 27 for setting a password.
Programme setup
You can run the auto search procedure again at any
time by accessing the Setup menu and Programme
Setup. Channels can be tuned automatically or
manually.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
1
2
3
4
Press a/b to select “Programme Setup”,
and then press ENTER.
If you have already set the password, enter
it here.
• See page 27 for setting a password.
MENU
[
Setup
...
Programme Setup
]
Setup Option
Child Lock
Input Label
Auto Installation
Programme Setup
Position
Language
5
Press a/b to select “Yes”, and then press
ENTER.
Press a/b to select the desired sound
system, and then press ENTER.
“Search is completed.” is displayed. Press
MENU to exit.
Auto search
You can also automatically search by performing the
procedure below. This is the same function as
programme auto search in auto installation.
Press a/b to select “Auto Search”, and then
press ENTER.