Operating instructions
Watching TV
Changing the volume
You can change the volume on the TV or on the
remote control unit.
-- VOL 4- V CH A INPUT POWER
(9@@
@@@
Using VOL +/=
• To increase the volume, press VOL+.
• To decrease the volume, press VOL=.
Press DISPLAY to display the current channel (or
input source)information on the screen.
When the TV receives a digital signal, press once, the
digital information will appear.
• Broadcast program name
• Station name • Remaining time
• Audio language • Program name
• V-CHIP RATING • HD or SD mark
• Closed Caption mark • V-Chip mark
VOLUME 25
• VOL+/= on the TV operates the same as VOL+/= on the
remote control unit.
Using MUTE on the remote control unit
Mutes the current sound output.
\_ ....................................MUTE
®@@
@@@
Press MUTE.
• "MUTE" will be displayed on the screen, and
the sound is silenced.
MUTE 1
Press DISPLAY again, the analog information wilt appear.
• Clock
• Channel number or VIDEO mode selected
• Channel label (if preset)
• Stereo or SAP (second audio program) audio status
• Content rating
• View mode
STEREO
SAP
TV-PG L V
SLEEP TIMER 2h00m
TV DIGITAL
ABCD
SIDE BAR CABLE
CLOCK 12:00AM SUN 7
Press DISPLAY again to clear the display.
• Analog channel status wilt display on the screen for
approx. 4 seconds. Digital channel status will display for
approx. 10 seconds.
• Mute can be canceled if you press VOL+/- or MUTE.
_=17