User Manual

19
Item 26o LCD COLOUR TV,
Model: LC-26P50E
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
Function
B/G, I, D/K, L, L’
TV-Standard (CCIR)
Specifications
LCD panel 26o Advanced Super View &
BLACK TFT LCD
Number of dots 1,555,200 dots (960 g 540 g 3 dots)
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
NOTE
• Refer to inside back cover for dimensional drawings.
VHF/UHF E2–E69ch, F2–F10ch, I21–I69ch, IR A–IR Jch
CATV Hyper-band, S1–S41ch
TV-Tuning System
Auto Preset 99 ch, Auto Label, Auto Sort
STEREO/BILINGUAL NICAM/A2
Receiving
Channel
Brightness 450 cd/m
2
Backlight life 60,000 hours (at Backlight Standard position)
Viewing angles H : 170° V : 170°
Audio amplifier 10W g 2
Speaker Ø 8 cm 2pcs
Terminals
SCART (AV input, Y/C input, RGB input, TV output)
EXT 2
EXT 3 RCA pin (Component input), S-VIDEO (Y/C input), RCA pin (AV input)
Rear
EXT 1
UHF/VHF 75q Din type
SCART (AV input/output, Y/C input, RGB input, AV Link)
Antenna input
EXT 4 HDMI, Ø 3.5 mm jack (Audio input)
OSD language
English/German/French/Italian/Spanish/Dutch/Swedish/Portuguese/Finnish/Turkish/Greek/
Russian/Polish
Power Requirement
AC 220–240 V, 50 Hz
Power Consumption
110 W (0.8 W Standby)
(Method IEC60107)
Weight
12 kg (Display only),
15.5 kg (Display with stand)
Appendix
32o LCD COLOUR TV,
Model: LC-32P50E
32o Advanced Super View &
BLACK TFT LCD
37o
LCD COLOUR TV,
Model: LC-37P50E
37o Advanced Super View &
BLACK TFT LCD
16 kg (Display only),
20 kg (Display with stand)
19.5 kg (Display only),
25 kg (Display with stand)
142 W (0.8 W Standby)
(Method IEC60107)
163 W (0.8 W Standby)
(Method IEC60107)
AUDIO OUTPUT RCA pin
Headphones
Ø 3.5mm jack (Audio output)
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –20°C to e60°C.