Manual

[] External Device Connection
[Component Video Cable Connection]
Component video connection offers better picture quality for video devices connected to the unit.
Use a component video cable to connect the unit to external video devices equipped with component video output
jacks.
If you connect to the unit's component video input jack, connect RCA audio cables to the audio L/R jacks of INPUT2.
rear of this unit
No te:
• This unit accepts 480i/480p video signals.
• If the external device enables 480p video signal to send to this unit, you can select the display mode either 4:3 (normal) or wide.
(Refer to TVScreen Display Mode" on page 18.)
[S-video Cable Connection]
S-video connection offers good picture quality for video devices connected to the unit.
Use an S-video cable to connect the unit to external video devices equipped with S-video output jack.
If you connect to the unit's S-video input jack, connect RCA audio cables to the audio L/R jacks of INPUT1.
I e.g.)
DVD player with the S-video
output jack
rear of this unit
r AUDIO OUT ] S-VIDEO
L R OUT
RCAaudio cable
Note:
• fyou connect to the S-videojack and the video jack at the same time, the S-video connection will have priority.
EN