- SHARP LCD AV MONITOR LC-15M4U Operation Manual

20
CONNECTING TO EXTERNAL DEVICES
Notes:
■ PC connection is not possible.
■ Use a commercially available audio/video cord for the cable.
■ When connecting or disconnecting the video cord (BNC TYPE) to or from the VIDEO input terminal, disconnect the
audio cable.
■ Only connect audio/video signals to AV 1/2 IN terminals. Connecting other signals may result in a malfunction.
■ Do not connect headphones to AV 2 IN.
■ For details concerning the usage and connection of external devices, see their respective instruction manuals.
AUDIO
Y P B
P R
COMPONENT
R L
AV 1 IN
VIDEO
POWER
INPUT
DC12V
AUDIO VIDEO
AV 2 IN/OUT
R L
TUNER/BAND
DVD
AUX 1
AUX 3AUX 2
SURROUND
ON/OFF
TUNER/BAND
DVD
AUX 1
AUX 3AUX 2
SURROUND
ON/OFF
Video
Audio
(R)
Audio
(L)
Video
Audio
(R)
Audio
(L)
VCR, Laser disc player, etc. DVD Player, etc.
To AUDIO input
terminal
Audio cord
To audio output
terminal
To AUDIO input
terminal
To audio output
terminal
To VIDEO input
terminal
To video output
terminal
To VIDEO input
terminal
To video output
terminal
Audio cordVideo cord
(BNC TYPE)
Video cord
(BNC TYPE)
This LCD monitor can be connected to most external devices as shown below.
When connecting to an external device, turn off the power of the main unit and then connect to the device
to prevent any possible damage.
* For improved picture quality from video
sources with COMPONENT output, use
the connection diagram on page 21.
Connecting to a VCR, a DVD Player, etc. (AV 1/2 IN)
LC-15M4U(20-28)Eng.p65 01.7.24, 5:17 PM20