User Manual

106
File Management
Do not move the handset until sending and
receiving of data is completed.
There may be some cases in which data are
poorly sent and received or the screen is off by
positioning the handset near depending on the
other party’s handset. In that case, put a distance
between the a marks apart/closer or move
them up/down or to the left/right.
To enter authentication code is required for
sending and receiving all data items. The
authentication code is a password exclusive to
iC communication. Before starting data
communication, the sender and receiver must
enter the same user-specified four-digit code. In
addition, to enter passcode may be required for
sending all data items.
Example: Still picture
1
In the home screen, [R]/
[Contents Manager]
2
Touch a still picture for a while/
[Share]/[Send by IC]
3
[Ok]
4
Place the a mark on that of the
other party’s handset
1
Place the a mark on that of the
other party’s handset
2
[Accept]
3
Drag the status bar down/select
received data
You can connect the handset to Bluetooth
devices wirelessly.
Wireless communications with all the Bluetooth
devices are not completely guaranteed.

Supported version
Bluetooth Specification Ver..0+EDR
*1

Supported profiles
*2
(Supported services)
HSP: Headset Profile
*3
HFP: Hands Free Profile
*4
A2DP: Advanced Audio Distribution Profile
*5
AVRCP: Audio/Video Remote Control Profile
*5
HID: Human Interface Device Profile
*6
DUN: Dial-up Networking Profile
*7
OPP: Object Push Profile
*8
SPP: Serial Port Profile
*9
PBAP: Phone Book Access Profile
*10
PAN: Personal Area Networking Profile
*11
HDP: Health Device Profile
*12
Sending and receiving by iC
Sending data
Receiving data
Bluetooth function
Supported version and supported
profiles