User's Manual

40
is15sh_e_03.fm
[40/41]
Getting Ready
A f (hold down for at least 2 seconds).
• Alternatively, hold K down for at least 2 seconds.
A f (hold down for at least 2 seconds).
• Alternatively, hold K down for at least 2 seconds.
B [Power off] [[OK].
Turn off the product once and restart.
A f (hold down for at least 2 seconds).
• Alternatively, hold K down for at least 2 seconds.
B [Reboot] [[OK].
If you press f or no operation is made for a specified time, the
screen is turned off temporarily, and then sleep mode is set.
■ Disabling Sleep Mode
■ When the product is closed
A f while sleep mode is set.
Alternatively, open the product while sleep mode is set to disable
sleep mode.
■ When the product is opened
A Press any key (other than u, d and b ) while sleep
mode is set.
memo
◎ If you use the microUSB cable to charge the battery pack, it may take the
battery pack longer to be fully charged than if you use the specified AC
adapter (sold separately).
◎ The product is turned on when it is connected while the power is turned off.
◎ If you charge the battery pack when the battery has run out, the charging/
incoming indicator may not illuminate. In such case, use the specified AC
adapter (sold separately) for charging.
Turning the Power On/Off
Turning the Power On
memo
◎ The initial setting of the touch panel will be executed until “AQUOS
PHONE” disappears from the screen after the power is turned on. Do not
touch the screen, otherwise touch panel operations may not be performed
properly.
Turning the Power Off
Restarting the Product
Sleep Mode
memo
◎ In some applications in use, the screen which was displayed before sleep
mode is set may be displayed when sleep mode is disabled.
◎ Do not touch the screen when you disable sleep mode. Otherwise touch
panel operations may not be performed properly.
is15sh_e.book 40 ページ ２０１２年６月８日 金曜日 午後３時５４分