User's Manual

25
is15sh_e_02.fm
[25/28]
Safety Precautions
B Hold the product securely and shake it approximately
20 times until there is no more water splashing.
• Make sure of the safety around you and shake the product while
holding it securely not to let it drop.
C Wipe off water remaining in the grooves of each
section by gently putting the product against a dry
and clean cloth etc.
• Since water is sometimes left in the grooves of each section, clear
them of water by putting a cloth against their openings and gently
patting them. Make sure that there is no more water or foreign
objects remaining in them.
D Lay out a dry cloth etc. beneath and leave the product
on the cloth at room temperature for approximately 2
to 3 hours to dry it.
• Water, if any, remaining in the main body may ooze up after wiping
off.
• Do not wipe off water remaining in the grooves directly by a cotton
swab etc.
■ Precautions to be taken after water draining
Do not use the product with water drops still left on it.
• Doing so may cause call disruption or cause clothes or bags to get
wet.
• Doing so may cause short circuit of a jack section.
• Doing so may cause fault due to the water drops frozen in a cold
place.
Mouthpiece
(Microphone)
section
Earpiece
(Receiver)
section
Speaker section
Camera lens
fringe section
is15sh_e.book 25 ページ ２０１２年６月８日 金曜日 午後３時５４分