User Manual

146
International Roaming
Date & time
If [Automatic] of Date & time is enabled, the
handset receives information with time and time
differences from overseas telecommunications
carrier, then time and time differences are
corrected.
Time and time differences may not be adjusted
correctly depending on overseas
telecommunications carrier. In such a case, set
time zone manually.
The correction timing differs depending on the
telecommunications carrier.
For details on Date & time nP. 89
Inquiries
When the handset or the docomo mini UIM card
is lost or stolen overseas, promptly contact
DOCOMO and conduct a procedure for
canceling the use of service from your country of
stay. Refer to the back of this manual for
inquiries. Note that communication/calling
charges after the handset or the docomo mini
UIM card is lost or stolen are incurred to the
subscriber.
For land-line phone, etc., “International call
access number” of your country of stay or
“Universal number international prefix” is
required.
The handset automatically connects to the
DOCOMO network after homecoming. If it fails,
perform the following setting.
Set Network Mode to [3G/GSM(Auto)]
(nP. 147).
Set telecommunications carriers to [Select
automatically] (nP. 147).
At the time of purchase, the handset is set to
automatically search for and switch to available
networks. When you want to manually switch
networks, set by performing following
operations.
1
In the home screen, [R]/
[Settings]/[Wireless &
networks]/[Mobile networks]
2
Select an item
 Data enabled: Enable data communication.
 Data roaming: For details on Data roaming
nP. 146
 Network Mode: For details on Network Mode
nP. 147
 Access Point Names: Set an access point.
 Network operators: For details on Network
operators nP. 147
Set whether to use data communication when
roaming.
1
In the home screen, [R]/
[Settings]/[Wireless &
networks]/[Mobile networks]/
[Data roaming]
Check after homecoming
Settings to use overseas
Data roaming
38