User Manual

ENGLISH
FEATURES
Plasmacluster Ion Control
The unit controls the ratio of negative ions
and positive ions depending on the con-
dition of the room.
• Clean Mode
Approximately the same numbers of posi-
tive and negative ions are discharged.
This mode is effective for reducing some
airborne mold.
• Ion Control Mode
Plenty of negative ions exist in natural
surroundings such as waterfalls or forests.
In this mode, negative ions will be re-
leased in an increased rate, in order to
bring the room air close to this natural
environment.
• AUTO Plasmacluster Ion Mode
The unit will switch between Clean Mode
and Ion Control Mode automatically de-
pending on the amount of impurities in the
air detected by the dust and odor sensor.
• Filters
1) Pre-Filter
It collects large particles.
2) Active Carbon Filter
Powerful deodorization by large parti-
cles of columnar charcoal.
3) HEPA (High Efficiency Particulate
Air) Filter with anti-bacterial Apatite
Filter
High-efficiency particle collection in-
cluding pollen and dust.
CONTENTS
SAFETY PRECAUTIONS ........................ E-2
• RISK OF ELECTRIC SHOCK ......................E-2
• CAUTIONS CONCERNING THE
OPERATION OF THIS PRODUCT ..............E-3
• REMOTE CONTROL LIMITATIONS ............E-3
• INSTALLATION GUIDELINES .....................E-3
• FILTER GUIDELINES ..................................E-3
PART NAMES.......................................... E-4
• MAIN UNIT DISPLAY ...................................E-4
• BACK ...........................................................E-6
• ACCESSORIES ...........................................E-6
PREPARATION........................................ E-7
• INSERTING BATTERIES
IN THE REMOTE CONTROL ......................E-7
• REMOTE CONTROL USE ...........................E-7
• FILTER INSTALLATION ...............................E-8
OPERATION .......................................... E-10
• MAIN UNIT OPERATION .......................... E-10
• REMOTE CONTROL OPERATION ...........E-11
CARE AND MAINTENANCE................. E-12
• MAIN UNIT................................................ E-12
• FILTER CLEANING................................... E-12
• ODOR SENSOR, DUST SENSOR ........... E-12
• FILTER REPLACEMENT
GUIDELINES ............................................ E-13
OPERATION GUIDE.............................. E-14
TROUBLE SHOOTING.......................... E-15
SPECIFICATIONS ................................. E-16
Thank you for purchasing the SHARP FU-
60SE-P. Please read this manual carefully for
the correct usage information. Before using this
product, be sure to read the section: “Safety
Precautions.”
After reading this manual, retain it in a conven-
ient location for future reference.
This product is for household use only.
E-1
FILTER MAINTENANCE
Some odor ingredients absorbed by
the filters may become separated and
may be discharged through the air
outlet and result in additional odor.
Depending on the usage environment,
the air outlet odor may become strong
after several months.
If this odor persists, this is because
the odor components absorbed by the
HEPA Filter have come off the filter.
Purchase the optional filter FZ-60SEF
and replace the original filters.
ENGLISH