Owner's Manual

Programming Auto-Dial Numbers

2. Send/Receive

Documents

Press and then or

until ENTRY MODE is selected in the

display.

Press . Make sure that

DESTINATION SETTING is selected.

Press . Press to select

CLEAR.

Press .

START/

ENTER

START/

ENTER

START/

ENTER

Editing auto-dial numbers

To make changes in a number previously stored, repeat the programming

procedure. Select the Rapid Key or Speed Dial number for which you want to

make changes in Step 5, and then change the number(s) and/or name(s)

when they appear in the display (Steps 7 and 9).

Clearing auto-dial numbers

Note: You cannot clear a number if it is used in a program or timer operation,

or if it is included in a Group Key. First clear the number from the operation or

group, then perform the following clearing procedure. To check where the

number is used, print out the Program/Group List or the Timer List as

explained on page 212.

Display:

MENU MODE

1:RECEIVE MODE

2:LISTING MODE

3:ENTRY MODE

ENTRY MODE

01:DESTINATION SETTING

02:PASSCODE SETTING

03:OWN PASSCODE SET

DESTINATION SETTING

1=SET

2=CLEAR

DESTINATION CLEAR

PRESS RAPID OR SPEED

all.book Page 43 Thursday, May 13, 2004 8:51 AM