Owner's Manual

Installing the Network Scanner Software

101

3. Network

Scanner

Enter any name you wish for the Process Definition Prefix and any letter for

Initial, and click Next. The prefix is used in the name that is assigned to the

Process Definitions you will select in step 3, and in the name of the Rapid Key

or Speed Dial number that is assigned to each selected process.

• The name of your computer initially appears in the Prefix box. If you wish to

change the prefix, enter a name in 6 characters.

• Enter any letter for the Initial (the initial is not used on the FO-DC500/525/

600, however, an entry is necessary).

Select the Process Definitions that you wish to use and click Next. Each

process that you select will be assigned a Rapid Key or Speed Dial number on

the machine.

• Network Scanner Tool is shipped with 3 pre-defined sets of instructions

called Process Definitions if you install both Sharpdesk and Network

Scanner Tool. The “Process Definition Prefix” that was set in Step 2

appears in the name of each process (“Sharp” is used for the prefix in the

examples below).

all.book Page 101 Thursday, May 13, 2004 8:51 AM