User Manual
Loading Printing Paper
16
1 Fan the paper, and then tap the edge
against a flat surface to even the stack.
Make sure the stack edges are even.
2 Insert the stack of paper into the tray, PRINT SIDE DOWN.
• If paper remains in the tray, take it out and combine it into a single stack
with the new paper.
• Be sure to load the paper so that printing takes place on the print side of
the paper. Printing on the reverse side may result in poor print quality.
•
GENTLY LOAD PAPER INTO THE PAPER TRAY.
•
DO NOT FORCE IT DOWN INTO THE FEED SLOT.
Note: Do not use paper that has already been printed on, or paper that is curled.
Loading Printing Paper
You can load up to 50 sheets of letter/A4 size (5 sheets of legal size), 60 - 80
g/m
2
paper in the paper tray (at room temperature; maximum stack height
should not be higher than the line on the tray).
Note: If you are going to use letter size paper, remove the A4 paper guide from the
right side of the paper tray.
The stack
should not
be higher
than this line
all.bookPage16Thursday,March7,20029:12AM