Specifications

ManualsBrandsSharp ManualsComputer equipmentFO-2080

TRANSMISSION RESERVATION

When your fax is busy receiving an original or transmitting an original from memory, you can "reserve" a

transmission by setting the original (either in the RSPF or on the document glass), reading it into memory, and

entering the fax number. Once the current operation is completed, your fax will automatically dial the number and

transmit the original saving you from having to wait.

When Using the RSPF:

Confirm that there are no originals on

the document glass and that copying

is not in progress, then gently close

the RSPF.

Adjust the original guides to the width

of your original.

Place the original face up and push it

gently into the RSPF. The top edge of

the original should enter the fax first.

Adjust the resolution

and/or contrast settings if

desired.

Enter the number of the receiving

machine using one of the following

methods:

• Press a Rapid key.

If you press a Rapid Key, the next step is not

necessary.

The number will be dialed once the current

operation is completed, and transmission will

begin once the connection is made.

• Press the [SPEED/SEARCH] key and enter a

Speed Dial number.

• Enter a full number with the numeric keys.

Press the [START] key ( ) if you

entered a Speed Dial number or a full

number.

• The number will be dialed once the current

operation is completed, and transmission will

begin once the connection is made.

When placing the Original on the Table:

Confirm that there are no original(s) in

the RSPF, and open the RSPF.

Place the original face down on the

document glass. Align the original

according to the original scale in the

illustration below. (Line up the center

of the edge of the original with the

( ) mark.)

Gently close the RSPF.

If needed, set the original size,

resolution, and contrast. (See

"DIALING AND TRANSMITTING"

(p.59))

Press the [START] key ( ) to scan

the page into memory. If you have