FULL DETAILED INSTRUCTION MANUAL
Table Of Contents
- 1 Part Names and Functions
- 2 Selecting an Operating Mode
- 3 Prior to Making Entries
- 4 Entries
- 5 Correction
- 6 Special Printing Function
- 7 Manager Mode
- 8 Reading (X) and Resetting (Z) of Sales Totals
- How to take a report
- Daily Sales Totals
- General report
- Department report
- Individual group total report on departments
- Full group total report on departments
- PLU/EAN report (by specified range/pickup)
- PLU/EAN report by associated department
- Individual PLU/EAN group report
- PLU/EAN group total report
- PLU/EAN stock report (by specified range/pickup)
- PLU top 20 sales report (by sales amount/by sales quantity)
- PLU/EAN zero sales report (full)
- PLU/EAN zero sales report (by dept.)
- PLU/EAN category report
- Transaction report
- Total in drawer report
- Commission sales report
- Individual clerk report
- Individual cashier report
- All clerk report
- Hourly report
- All cashier report
- GLU report by specified range
- GLU report by clerk
- Balance report
- Periodic Report Sample
- Compulsory Cash/Check Declaration
- 9 Non-accessed EAN Deletion
- 10 Prior to Programming
- 11 Programming
- Basic Instructions
- Article Programming
- Direct Key Programming
- Functional Programming
- Media Key Programming
- Training Clerk/Cashier Programming
- Function Text Programming
- Personnel Programming
- Terminal Programming
- Date/Time Setting
- Optional Feature Selection
- Report Programming
- Message Programming
- Device Configuration Programming
- GLU Code Programming
- Tax Programming
- On-line Configuration Programming
- VMP Configuration Programming
- Automatic Sequencing Key Programming
- Reading of Stored Programs
- SD CARD Mode
- iSDC Mode
- 12 Electronic Journal
- 13 European Article Number (EAN) or Universal Product Code (UPC)
- 14 EURO Migration Function
- 15 Operator Maintenance
- In Case of Power Failure
- In Case of Printer Error
- Cautions in Handling the Printer and Recording Paper
- Replacing the Paper Rolls
- Cleaning the Printer (Printer Head/Sensor/Roller)
- Removing the Till and the Drawer
- Opening the Drawer by Hand
- Drawer Lock Key
- Installing the Fixing Angle Bracket
- Before Calling for Service
- 16 Specifications
208
■
Send item (continued)
• STOCK (Use the selective entry)
YES: Sends the PLU/EAN stock report.
NO: Does not send the PLU/EAN stock report.
• CLERK Z1 (Use the selective entry)
YES: Sends the clerk Z1 report.
NO: Does not send the clerk Z1 report.
• CLERK Z2 (Use the selective entry)
YES: Sends the clerk Z2 report.
NO: Does not send the clerk Z2 report.
• CASHIER Z1 (Use the selective entry)
YES: Sends the cashier Z1 report.
NO: Does not send the cashier Z1 report.
• CASHIER Z2 (Use the selective entry)
YES: Sends the cashier Z2 report.
NO: Does not send the cashier Z2 report.
• HOURLY (Use the selective entry)
YES: Sends the hourly report.
NO: Does not send the hourly report.
• DAILY NET (Use the selective entry)
YES: Sends the daily net report.
NO: Does not send the daily net report.
■
Report
Procedure
▼
1.
In the mode selection window, select “9 iSDC MODE”.
2.
Select “2 SETTING”.
3.
Select “3 REPORT”.
4.
Program each item as follows:
• STACKED1 (Use the character entry)
PRINT: Prints all reports included in the stacked report 1
are printed.
NOT PRINT: Does not print the reports.
• STACKED2 (Use the character entry)
PRINT: Prints all reports included in the stacked report 2
are printed.
NOT PRINT: Does not print the reports.