ER-A410/A420 Operation-Manual GB

160

Removing the paper roll

When a red dye appears on the paper roll, it is time to replace the existing paper roll. Replace the paper roll

with a new one. If you plan not to use your register for an extended period of time, remove the paper roll, and

store it in the appropriate place.

Removing the receipt paper roll

1. Remove the printer cover.

2. Cut the paper behind the printer and near the paper roll.

3. Press the

‰

key until the paper remaining in the printer

comes out completely.

4. Remove the paper roll from the back of the printer.

Do not pull the paper through the printer.

Removing the journal paper roll

1. Remove the printer cover.

2. Press the

key to advance the journal paper until its

printed part is out of the way.

3. Cut the paper and remove the take-up spool.

4. Cut the paper behind the printer and near the paper roll.

5. Press the

key until the paper remaining in the printer

comes out completely.

6. Remove the paper roll from the back of the printer.

Do not pull the paper through the printer.

Note

Area to cut

MAINTENANCE-A410/A420 02.4.20 6:51 PM Page 160