ER-A410/A420 Operation-Manual GB

PLU level shift (for direct PLU)
This shift can double or triple the number of PLUs on your register without adding additional direct PLU keys.
You can use direct PLUs in three levels by utilizing shift keys
l
,
¬
, and
Ò
. These keys have the following
functions.
l
: Shifts the PLU level from level 2 or 3 to level 1 (ordinary level).
¬
: Shifts the PLU level from level 1 or 3 to level 2.
Ò
: Shifts the PLU level from level 1 or 2 to level 3.
You must program your machine in the PGM mode to select one of the two PLU level shift modes — automatic
return mode* and lock shift mode** — and decide whether to allow PLU level shift in both the REG and MGR
modes or in the MGR mode alone.
* The automatic return mode automatically shifts the PLU level back to level 1 after a direct PLU key is pressed.
You can select whether the PLU level should return each time you enter one item or each time you finalize
one transaction.
** The lock shift mode holds the current PLU level until pressing of a PLU level shift key.
Automatic return mode
If you shift the PLU level in the automatic return mode, press a desired PLU level shift key before numeric entry.
• each item
• each transaction
Lock shift mode
If you shift the PLU level in the lock shift mode, press a desired PLU level shift key before numeric entry.
If you select the automatic return mode, it is not necessary to use the
l
key on the keyboard, but
if you select the lock shift mode, it is necessary to use the key.
Note
¬
l
Direct PLU
(Qty,
)
Numeric entry
Ò
To shift the level of another PLU
Procedure
Ò
¬
Direct PLU Payment
(Qty,
)
Numeric entry
Ò
¬
Direct PLU
(Qty,
)
Numeric entry
Procedure
Special entries for PLUs
2
130
FOR THE OPERATOR-A410/A420 02.4.20 6:51 PM Page 130