ER-A280F/N Operation-Manual GB

Computation of VAT (Value Added Tax)/Tax

■ VAT/tax system

The register may be programmed for the following six tax systems by your authorized SHARP dealer.

Automatic VAT 1 through 6 system (Automatic operation method using programmed percentages)

This system, at settlement, calculates VAT for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and

taxable 6 subtotals by using the corresponding programmed percentages.

Automatic tax 1 through 6 system (Automatic operation method using programmed percentages)

This system, at settlement, calculates taxes for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and

taxable 6 subtotals by using the corresponding programmed percentages, and also adds the calculated

taxes to those subtotals, respectively.

Manual VAT 1 through 6 system (Manual entry method using programmed percentages)

This system provides the VAT calculation for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and

taxable 6 subtotals. This calculation is performed using the corresponding programmed percentages when

the

key is pressed just after the

key.

Manual VAT 1 system (Manual entry method for subtotals that uses VAT 1 preset percentages)

This system enables the VAT calculation for the then subtotal. This calculation is performed using the VAT 1

preset percentages when the

key is pressed just after the

key. For this system, the keyed-in tax rate

can be used.

Manual tax 1 through 6 system (Manual entry method using programmed percentages)

This system provides the tax calculation for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and taxable

6 subtotals. This calculation is performed using the corresponding programmed percentages when the

key is pressed just after the

key. After this calculation, you must finalize the transaction.

Automatic VAT 1 through 3 and tax 4 through 6 system

This system enables the calculation in the combination with automatic VAT 1 through 3 and tax 4 through 6.

This combination can be any of VAT 1 through 3 and tax 4 through 6. The tax amount is calculated

automatically with the percentages previously programmed for these taxes.

Procedure

VAT rate

To use a programmed rate

Procedure

ER-A280F_N(SEEG)(E)-2 09.6.18 6:50 AM Page 48